spider mites on weed buds

Buds with possible mites = bad to smoke?

Well-Known Member
Well-Known Member
Active Member
Well-Known Member
Active Member
The Knuck
Active Member

smoke it, most are gone during the drying process, alot split when the bud dies.

if you have ever been i regular buyer off the street you have probably smoked many many mites, mass growers get an infestation

once in awhile and they dont throw out thousands in weed.

Well-Known Member

Yeah thats true about the street-level buds.. im sure theres plenty with mites.
And also i agree the mites probably take off when the bud dies..

But what bothers me, which i notice the most, are the small strands of stringy hair in the buds!
I mean, its obvious that its some kind of webbing material that gets left from the spider mites.
Even if the mite problem was minimal, and no webs even got formed, the strands of hair still remain on buds after harvest!

Do you guys know what im talking about? like you could take a pile of buds and try to pick one of them up, and
a different piece of bud will be hanging from it by an invisible string lol. thats what bothers me is that crap.

harry paratestes
Well-Known Member

But seriously, does anybody know what im talking about, the hair thing?


But seriously, does anybody know what im talking about, the hair thing?

Well-Known Member

But seriously, does anybody know what im talking about, the hair thing?

Well-Known Member
Well-Known Member

Put your plants in the shower or hose them down to remove most of the vermin.

Use Zero Tolerance mite spray. It’s just essential oils.

Mites can’t tolerate certain scents, like garlic, chives, peppermint, coriander, etc. I dissolve a peppermint candy in my watering can, every once in a while. I also use an organic flea collar that just has essential oils in it. keep the bugs at bay, don’t let them setup shop.


I don’t think smoking the mites are very good for you.
The mites get inside the buds and then stick to the resin and die.
You can’t get them out. Washing the buds don’t sound like a very good idea either.
Doing that will just wash off the trichs and THC and degrade the bud, not to mention increase
the chance of mold. I think the best thing to do is scrap the plant.

Then make sure you thoroughly clean your grow room and rid it of any possiblities of bugs.
Once you do that then start another grow. This time be very diligent and avoid contaminating new grow.
Spray your plant with Neem oil every week during veg as a preventative measure. Bugs don’t like neem oil
and it will help keep them away. But most important is not to infect your plant with any insects. Don’t go near your grow
after being outside in your outdoor garden. Seperate all tools from outdoor to indoor. You don’t want to cross contaminate.
Those mites are a royal bitch. If you grew outdoors then you may consider indoor. You can grow outdoor, but be careful not to grow next to anything that might have mites. If you had them outdoor you want to spray thoroughly every crevis to get rid of them. Even then you can’t be sure.

Well-Known Member

well I deal with the little fuckers all the time. Less each year so I am getting somewhere.
When I hung the bud all the live ones will leave the bud but I’m sure some are still there.

I’ve smoked the bud, it was fine. Do you have a dog? Dog hair will do the same thing.

Well-Known Member

I would say, In a jar they would have no oxygen, wouldnt they die?
Im not a scientist. so idk.

but i had em on a crop, had no real compaints. other than the bud wasnt that good. no sickness or anything

Active Member

sick of mites try this
Control all stages of mites and whiteflies with new Forbid™
Forbid offers outstanding knockdown and residual control of mites and whiteflies. The active ingredient in Forbid, spiromesifen, represents a new class of chemistry from Bayer Environmental Science, called the tetramic acids. Thanks to its novel mode of action, foliar-applied Forbid offers growers an effective tool for management of mites resistant to conventional products. It features translaminar activity, controlling mites on both sides of leaves, and has activity from egg through adult life stages (This means you can spray the top of the leaves and Forbid will still kill mites on the underside!) Usage is only 1/8 to 1/4 teaspoons per gallon of spray solution.

Insects Controlled

  • Spider mites
    • twospotted spidermite
    • southern red mite
    • maple spider mite
    • honey locust spider mite
    • Euonymus mite
    • boxwood spider mite
    • tumid mite
    • Lewis mite
  • False spider mites
  • Rust mites
  • Tarsonemid mites
    • broad mites
    • cyclamen mite
  • Whiteflies
    • silverleaf
    • greenhouse
    • sweetpotato

Ive always wondered, so i thought i'd ask.. If you had a minor case of spider mites that was under control for the majority of the grow, but started to get…

How To Get Rid Of Spider Mites On Drying Weed

If you’re worried about how to get rid of spider mites on drying weed, manual removal and insecticides should solve this annoying problem. As a weed grower, one of the pests you might encounter throughout the process is spider mites. However, management practices should help you prevent infestation, and even if you saw them on drying weed, you can still salvage your plants.

Using a greenhouse for weeds is advantageous because you have more control over the conditions and prevent potential contamination. Some experts also recommend using hydroponic systems since spider mites are more common in the soil to feed on dead organic matter. Nonetheless, the two methods should free you of these pesky mites, and you can read further on how to prevent them in the first place.

How To Get Rid Of Spider Mites On Drying Weed The Best Ways

Manual removal

Spider mites are tiny and difficult to spot with the naked eye. This is one reason why weed growers do not immediately notice them until they are too many to eradicate. One might even mistake the webbing that these mites produce as mold, so their approach is for solving mold growth in the greenhouse instead of mites.

However, you can still manually remove these pesky critters in your drying weed. All you need to do is let them help you see them. That is right; you’re going to trick these tiny mites into showing themselves for easier removal.

Those who have experienced mite infestation on drying weed recommend not to harvest your buds. Instead, cut off the whole infested plant then hang it upside down. The idea behind this is that the plant’s upside-down orientation makes it easier for you to notice and remove the mites running up the stem.

Spider mites often go upward to the plant, so hanging your weeds should help you spot and remove them more comfortably. Another great tip is to do this when it’s quite dark since mites will run toward the light so that those hiding will come out of their spots.


If manual removal is too tedious with the number of mites on the drying weed, you can consider using insecticides. You can look for recommended insecticides by weed growers for spider mites. To give you one specific example, it’s the liquid ladybug spider mite spray .

We all want to stay away from insecticides as much as possible, but this brand is safe for all living things and won’t affect your plants’ quality. It has no petrochemicals and won’t leave odor or residues on your crops. Another great thing with liquid ladybug is that you can use it indoors with or without lights since it’s not phototropic.

Using insecticides like this for drying weed would be the ideal solution if you don’t want to throw out the budding since you can still keep some to smoke.

Signs Of Spider Mites On Weed

Prevention is always better than problem-solving, so it’s essential to educate yourself with the signs that your weed plants might have spider mites. The clearest sign would be noticing an off-white to yellowish speckled appearance onto your plants. You may see that the leaves look bronze in color, and the plants are noticeably stressed.

As mentioned previously, spider mites also leave a special webbing onto the vegetation. You might mistake them as mold since the webs cover flowers and buds entirely. You can also check the underside of leaves for this webbing.

How To Prevent Spider Mites On Weed

A trusted preventative method for spider mites is isolating new plants for two weeks. Cleaning and sanitation should also keep these bugs away, so never neglect dead marijuana leaves and maintain proper hygiene. And lastly, the structure of the greenhouse should not be inviting for these bugs.

For example, improve the protection from outdoor mites by adding a filter on the windows. You can also maintain the temperature and humidity at ideal levels. Spider mites thrive in high heat but have trouble reproducing in humid environments.

How To Solve Spider Mites Infestation On Weed

Hard water spray during the morning three consecutive times should help you eradicate spider mites and their webs. The spray pushes the mites to fall to the ground so they’ll die from lack of food if they cannot climb back up. Otherwise, you can use a vacuum cleaner straight onto your leaves to suck mites from the weeds.

However, spider mites can infest your plants again, so it’s necessary to maintain the preventative practices mentioned earlier. You can also get their natural predator, ladybugs, to feed on the mites.


Diligence throughout the growing process of weed is crucial as problems may arise anytime. One of them is the infestation of bugs, so you should learn how to get rid of spider mites on drying weed. You can manually remove the critters by hanging the plants upside down or use an insecticide that is safe and chemical-free.

Additionally, be on the lookout for webs and speckled appearance on your weed plants as they are signs of spider mites. Ensure proper hygiene, cleanliness, and sanitation to avoid bringing the mites in your greenhouse. Lastly, maintain the temperature and humidity at optimal conditions to discourage mite growth and reproduction.

If you're worried about how to get rid of spider mites on drying weed, manual removal and insecticides should solve this annoying problem. As a weed grower,