How To Smoke Weed Out Of An Apple
An apple pipe, sometimes mistakenly referred to as an apple bong, is a smoking device you can have ready to go in minutes. Not to be confused with a guide on how to make an apple bong, you’re now reading an article that reveals the secrets of an apple pipe. Bongs use water to filter the smoke before you inhale, while a pipe creates a direct line from the smoke to your lungs. Just imagine how much engineering skills it would take to fit a water-filled chamber inside an apple! That’s why we give preference to the apple pipe – a smoking* device that’s easy and fun to make for weed enthusiasts of all calibers. Ever wondered how to make a pipe out of an apple? Let us explain.
Why Would You Want To Smoke From An Apple?
Smoking weed out of an apple is an easy way out for when you don’t have anything else to smoke from. The secret to its popularity is the accessibility of an apple pipe’s parts – if you can get your hands on some pot, you can definitely find an apple and a pen. Besides, if you want to keep your cannabis consumption on the down-low, using an apple pipe is a great way to be discreet and avoid owning glass. It’s also just a fun, organic way to smoke!
Best Tasting Weed
Provisions For Your Pipe
For the first method, you’ll need just three things:
- Ballpoint pen
Make sure the pen is the disposable kind with an easily removable tip and inkwell. You only really need the empty pen casing for this method.
For the second method, the apple slice pipe, you’ll need:
- Toothpicks or skewers
- Paper towel
Got everything you need? Then you’re ready to learn how to make an apple pipe. Let’s get started!
Method 1 – Your First Apple Pipe
We’re going to break down step by step how you can turn an apple into a pipe using only a ballpoint pen. There are other methods, such as the hollowed apple pipe, which requires more materials, but the basics are the same.
Twist Off The Stem
First, you’re going to want to completely remove the stem from the apple. Use your fingers to twist off the stem as close to the apple as possible, ensuring you get it completely out of there.
How To Roll A Joint Without Papers
Carve Out The Apple Bowl
Take your pen apart so that you just have the hollow tube. Puncture the apple at a slight angle with this tube and push until you’re about halfway through. You’ll likely end up with some apple bits inside the hollow pen. If so, you can wiggle your tool around in your chamber or try blowing it out in the next step.
Make The Pipe Mouthpiece
Next, you’re going to make your mouthpiece. Choose a spot on the side of the apple that would be most comfortable to smoke from and line up the pen so that the two chambers meet from the bowl to the mouthpiece. Once you’ve punctured the apple and the holes are connected, blow through the mouthpiece to remove any stray apple bits in the two chambers you’ve created.
Make a Carb For A Controlled Hit
Finally, you’re going to need a carb to control your hit. Do the same thing as with the mouthpiece, making sure that the carb chamber intersects with the system you’ve already created. You could either make it perpendicular to your mouthpiece or as an extension of the mouthpiece’s chamber, depending on where you like your carb to be. Regardless, the carb should be in a place that’s convenient to cover with a finger while you’re lighting the pipe.
Time To Spark Up!
Now it’s time to enjoy the literal fruits of your labor! Pack your bowl at the top of the apple and use it like a classic pipe. Instead of using something like punctured tin foil for a screen, consider using a large nug as a bed for your ground-up cannabis. This way, you won’t lose any of your bud in the apple and will even have a little extra to smoke! There’s no special way to light an apple pipe – just use it in the same way you would your typical glass pipe. After all, it’s the same concept!
How To Grind Weed Without A Grinder
Method 2 – The Apple Slice Pipe
You can also make a pipe out of a piece of an apple, in case you want to leave a healthy snack alongside your bowl. This takes a little more effort, requiring a knife, skewer and paper towel, but the result is both delicious and nutritious.
Cut Off A Side Of The Apple
First, cut off one side of the apple, avoiding the core. You’ll have a large slice, about a third of the apple.
Establish The Basic Shape Of The Pipe
From this apple section, cut off the two outer thirds of the apple piece to make a roughly rectangular pipe shape.
Carve Out The Bowl
Next, use a knife to carefully carve out a bowl on the flat, fleshy side of the apple. Position your bowl toward the top of the apple slice. It might also be helpful to use your fingers to smooth out the bowl.
Complete The Mouthpiece
The mouthpiece is up next; slice around 1cm (a little under half an inch) from the bottom to make room for the mouthpiece. Then, from this new flat end, puncture the slice with a skewer to meet just underneath the bowl you already carved out. Be careful to line it up properly!
Some Optional Steps
A purely aesthetic decision, you can also slice off the side of the apple with skin on it so that it looks more purely rectangular, but this won’t do anything to enhance your actual smoking experience. Another matter of preference is, if you want a carb on this pipe, to poke a hole perpendicular to the chamber you just created.
How To Make A Gravity Bong
Light It Up!
Finally, it’s time to light up! You may want to use a paper towel to dry off your pipe, particularly inside the bowl, before you pack it. Cut yourself up some apple slices and enjoy your stoney snack!
Now that you’ve got the basics down for the design of the apple pipe, you may have some other questions. We have the answers!
Does an apple pipe make weed taste better?
Unfortunately, no, smoking weed out of an apple pipe isn’t going to make your weed taste like apples. But since you won’t be smoking out of glass, you will get to enjoy a taste untainted by resin build-up!
How long will the apple pipe last?
It’s probably for the best if your apple pipe remains a single-use device, since apples brown quickly once they’ve been cut. You could probably get away with using your apple pipe a few times in one day if you’re good about storing it in the fridge in between smoke sessions.
Are there other fruits I can smoke out of?
Apples certainly aren’t the only fruit you can use for smoking! Basically any fruit and many vegetables are great for impromptu pipes. If you’re not feeling challenged enough with an apple pipe, try making one out of a strawberry, banana or carrot.
Good, Old-Fashioned Organic Fun
With this guide in hand, you’ll be ready to incorporate fruit into your next smoke sesh. It’s fun to switch things up by trying something new to enhance the cannabis experience every once in a while, and hopefully, this guide has inspired you to get creative with your cannabis use. We’d love to hear in the comments below what other fruits and vegetables you’ve turned into pipes!
Just imagine how much engineering skills it would take to fit a water-filled chamber inside an apple! With this guide in hand, you’ll be ready to incorporate fruit into your next smoke sesh
How to make an apple pipe
Copy article link to clipboard.
Link copied to clipboard.
- What is an apple pipe?
- How do you make an apple pipe?
- Why should I make an apple pipe?
What is an apple pipe?
An apple pipe — sometimes called an apple bong — is a homemade pipe constructed from an apple that is used to smoke cannabis. Apple pipes are considered one of the healthier options for DIY smoking devices, especially when compared to constructing pipes of tin foil or soda cans. Discreet and inexpensive, the apple pipe is a favorite among cannabis consumers who have no papers or glass pipes on hand, want to easily dispose of consumption evidence, or don’t want to go through the hassle of cleaning a traditional device. Read on to learn how to make your own apple pipe.
How do you make an apple pipe?
Crafting an apple pipe may seem complex, but in just a few simple steps you will soon be smoking cannabis out of your own healthy fruit.
Here’s what you’ll need to make and use a classic apple pipe:
- an apple
- a toothpick
- a clean screwdriver or chopstick
- a lighter
Assemble the necessary supplies. Photo by: Gina Coleman/Weedmaps
1. Remove the apple stem, making sure to remove the entire stem down to its base. This divot in the apple will serve as your bowl.
2. Use your screwdriver or chopstick to poke a hole across the center of the apple. One hole will function as the base for your mouthpiece while the other will function as the carb.
3. Use your toothpick to poke a few holes in the top of the apple far enough to intersect with the hole you just made through the center of the apple. This will allow air to flow from the bowl to the mouthpiece without letting flower fall through.
Pack the top with your favorite cannabis strain. Photo by: Gina Coleman/Weedmaps
4. Do a test run and inhale through the hole you’ve chosen to be your mouthpiece to ensure air can flow through properly.
5. Pack the top of the apple with weed.
6. Place your mouth on the hole you’ve chosen to be your mouthpiece and cover the other hole with your free hand as you light the weed in the bowl.
7. Inhale and enjoy.
Hold the apple in one hand with your finger covering the carb and use your other hand to light the greens, pulling the hit through the hole near the bottom of the apple. Photo by: Gina Coleman/Weedmaps
Why should I make an apple pipe?
Apple pipes are well-known for their discretion and easy disposal characteristics. Apples are also incredibly inexpensive and make for a good substitute when rolling papers or a personal pipe aren’t available or accessible. Cannabis consumers also don’t lose THC resin to glass in the same way as a traditional pipe, so you get more THC bang for your buck and don’t have to deal with the hassle of cleaning your pipe after use. Finally, you theoretically could eat the apple once you’re done smoking — though we wouldn’t recommend it.
How to make an apple pipe Copy article link to clipboard. Link copied to clipboard. Contents What is an apple pipe? How do you make an apple pipe? Why should I make an