Pot in a pot
As an early originator of the Pot-in-Pot System, Nursery Supplies remains to have the best container design for this method of in-ground growing. The system uses our highly durable Grip-Lip ® as an outer container and our more economical Econo-Grip™ as an interior liner to save time, money and to produces a healthier product.
Because the pot is placed in a socket in the ground, the environment the plant grows in is much easier to control – The plant won’t blow over in strong winds – the root ball will maintain better temperatures – fertilizer and water can be controlled easier – and harvesting your crop is as easy as lifting the pot out of the socket, saving your plants roots.
This growing system produces healthier plants, with more robust root systems. Pot-in-Pot can be used by virtually any grower, in any area, under conditions that are dry or wet, flat or hilly, mild or harsh. Plants grow faster, labor costs are reduced, plants are healthier and harvesting can take place year round. Pot-in-pot is used primarily by growers of large plants and trees (most commonly in #15 or #25 pots), but has been successfully used with pots as small as seven gallons.
Growers have found that the long-term savings they experience in production and labor expense far outweighs the slightly higher installation cost of a Pot-in-Pot system. The Pot-in-Pot system is one of the best ways to grow healthier plants with exceptional growing success.
Try our pot-in-pot nursery system. Nursery Supplies, Inc. sells the Pot-in-Pot system & is one of the best ways to grow healthier plants.
Pot-in-pot technique for easy annuals
Annuals are often amazing in their variety and they bring fresh change to the garden.
The pot-in-pot technique is a great way to make replacing them and caring for them is as easy as pot in, pot out!
Pots come in many sizes and you can take advantage of this to make your spring gardening very easy indeed. Simply bury a slightly larger pot in the ground and fill it with a smaller flower pot that fits right in!
What is the pot-in-pot technique?
Usually, it’s recommended to plant your flowers directly in the ground. That’s what gives the plant the most freedom to grow and search for nutrients.
But in some cases, it’s best to consider the pot in pot concept for planting your plants in the ground without removing the pot you purchased them in.
Setting up a planting pot-in-pot
To set up a pot-in-pot planting bed, simply do the following:
- Identify the usual size of pots that your local nursery sells potted plants in.
Usually, this will be either a 4-inch pot (10 cm) for small annuals or a 7-8 inch pot (18-20 cm) for larger ones. The former are sometimes called half-quart pots and the latter gallon pots.
- Purchase one or more pots that are just one size larger. Check that all pots involved have drainage holes.
One size larger means the diameter of the pot is around 1 inch across larger than the first pot. When pot sizes are marked in volume, though, the rating almost doubles. Basically you just want a snug fit between the plant pot and the larger pot.
- Bury the larger pot in the ground at the right place. This is called the socket pot.
- Best is to set up a drainage layer in the hole, under the pot.
Ensure the rim stays visible, perhaps letting it jut out of the soil by half an inch (1.5 cm). The larger, buried pot should rest on a bed of highly draining material, like clay pebbles or gravel. This pot will stay in the ground year after year.
- Place the plant you just purchased with the smaller pot inside the larger one. This can be called the plug pot.
That’s all! Water thoroughly at first, and you’ll have to keep watering on a regular basis throughout the summer.
You can also use mulch of all sorts to beautify the garden bed, even hiding out the pots if you find them ungainly.
When is it relevant to use the pot in pot technique?
Sometimes you just don’t have time to go into all that hole-digging and dirt shoveling year after year, but there are also other good reasons for using the pot in the ground technique:
- switching annuals and plants to different areas in the garden.
- replacing annuals is as easy as lifting the old pot out and putting the new one in.
- invasive plants are much easier to control and won’t spread, like mint.
- water reaches the plant directly since the rim forms a retaining bowl.
- ornamental pots with elegant rims can decorate the bed as well.
- bringing non-hardy annuals and plants indoors doesn’t require any dirty digging anymore.
More interestingly, this technique is useful when growing and training bonsai.
- It’s particularly relevant for bonsai created from seeds or young nursery plants.
- This is because bonsai trunks will only grow thick if planted in the ground to leaf and grow naturally for a time.
- A great example is this Katsura bonsai tree
You can also use this technique to bring your indoor plants out in the summer for a bit of fresh sun over the season. They’ll resist high temperatures better if their root ball and pot are below ground level instead of above it, since temperatures are cooler underground.
Precautions when growing plants in pots in the ground
Plants that grow in pots that are embedded in the ground won’t be able to spread their roots out as easily as plants that are free-planted. They’ll tend to send a few roots out of the draining holes.
- Plants won’t grow as large because they have access to less nutrients.
- Plants with a pot in the ground need more watering.
If you’re using the pot in ground technique for indoor plants, remember that most of the nutrients they’ll find will be those in their own potting soil mix. You’ll have to keep repotting them on schedule, fertilize them or topdress them to ensure they have enough to keep on going.
- Fortunately, the pot-in-pot technique makes caring for your plants easier: repotting is typically a raised garden activity.
- Make your own fermented weed fertilizer and use it to both water and nourish your pot-in-pot plants!
If you’re willing to use it, you can reduce the need for frequent watering by spreading a few tablespoons of hydrogel powder in the space between both pots.
When to replace plants with the pot in a pot system
Usually, summer annuals will die off in fall or at the beginning of winter. You can pull them out when flowers have wilted and discard them in the compost, or let them be during the winter and only replace them directly come spring.
But when replacing pots in your garden is so easy, why not replace them with winter-blooming flowers such as heather? You’ll be able to switch them back to summer flowers in spring. And you can probably set those winter flowers in their own buried pot bed in a cooler, shady place that will protect them from the summer heat and sun.
Planting pots in pots on social media
Click to open posts in a new tab. Follow us there, comment, and share!
Also nice: create or join a topic on our gardening techniques forum, too.
Credits for images shared to Nature & Garden (all edits by Gaspard Lorthiois):
Pot-in-pot technique for a growing bed (also on social media) by Keith Hall, Nature & Garden contributor
Coleus in a pot-in-pot bed by Keith Hall, Nature & Garden contributor
Wonder how to reconcile all that planting in Spring and uprooting in Fall? The pot-in-pot garden makes switching out winter and summer plants a cinch!