Categories
BLOG

leafy smoking weed

Can You Smoke Weed Leaves and Get High?

It’s probably no surprise you can smoke weed leaves, but the real question is – will it get you high? Also, how strong is the high? Are certain types of leaves better for smoking than others? Should I dry/cure my leaves before smoking them?

There are lots of questions, and I intend on answering as many of them as I can in this post.

The Confusion About What Part of The Plant You Smoke

There are a lot of people who don’t actually realize what part of this plant is being smoked. Many people think the leaf is what is actually smoked. In reality, the bud of the plant is what’s commonly smoked.

This may seem comical to someone who is more familiar with cannabis, but I totally understand why people might think people are smoking leaves. The weed leaf has been the iconic symbol for weed for decades. It’s on hats, shirts, posters, and a million other things. How many times do you see a picture of a bud on a shirt? Much Less. Also, other smokable plants like tobacco are harvested for their leaves so there’s a logical connection there too.

So, the bud is what is commonly smoked, but that still leaves the question of whether or not you can smoke the leaves of a cannabis plant. And perhaps the more important question – will it actually get you high?

Types of Weed Leaves: Fan Leaves, Sugar Leaves, and Trimmings

Not all weed leaves are created equal. All types of leaves are necessary for the health of the plant, but sugar leaves are what you really want if you’re looking to smoke some leaves. I’m going to break down the most common types of leaves you’ll come across.

Sugar Leaves / Trimmings

This is the good stuff. Sugar leaves are going to be found near the buds. These leaves are typically the smaller ones. The name sugar leaf comes from the fact that they can be covered in trichomes (i.e. sticky icky) giving them a sugary white appearance. These trichomes contain THC.

I bundle trimmings together with sugar leaves. Trimmings can refer to anything you trim off a plant, but in this case, I’m referring to the leaves that are growing through the buds. In this case, you don’t cut off the entire leaf, but rather trim the parts of the leaf that are sticking out through the bud.

Both of these can be full of trichomes and are totally smokable. It’s not going to get you high like bud would, but some enough good sugar leaves or trimmings could certainly get the job done.

Fan Leaves

Fan leaves grow farther away from the buds and can get pretty large. These leaves are vital for soaking up light, but unfortunately, they do not contain nearly the same amount of THC-filled trichomes as sugar leaves.

Some fan leaves may have more than other so it doesn’t hurt to give them a look. Check the stems as these can sometimes be a source of trichomes. In the end, I really don’t suggest smoking fan leaves if your intention is to get high. It would just take too much to be effective. Smoking so much would probably make you light headed before it would get you high.

Making Hash or Edibles w/ Weed Leaves

The idea of having to smoke so much plant matter to get high has led a lot of people to use their trim leaves to make hash or edibles. This allows you to concentrate the THC so you don’t have to consume so much.

Edibles

Making edibles with trim is mostly the same as making edibles with buds. The main difference is you’re going to have to use more material. It can also be difficult to gauge the strength of the edibles so don’t go overboard. You can find recipes for edibles easily online. Just substitute the bud for trim.

Hash

Using trim to make hash is common practice for most commercial growers. The sugar leaves and trim just have too much THC to simply throw it away.

Be very careful if you are planning to make hash. I do not recommend using solvents to make concentrates (like BHO) unless you have training and a proper lab to make it. Instead, try making bubble hash. It creates a terrific product without using solvents or even heat.

Eating Weed Leaves

If you really want to know more about eating weed to get high then I recommend you read my article specifically on the subject. Put simply, while you could get high from just eating weed leaves, it is a really terrible way to get high. You would have to eat a lot of leaves and most of the THCa would never get converted to THC and it would just pass through your digestive system. Again, if you want to know more about this check out the link to my article above.

When is the Best Time in the Plant’s Life Cycle to Smoke the Leaves?

THC is produced at certain times during the plant’s life cycle. The plant goes through further changes as the leaf is dried and cured. Most people agree the best time to smoke a weed leaf is after it’s cured.

Cured

After a plant has reached its full maturity it is ready to be harvested. At this time, the plant is cut down and allowed to dry out. Once it’s dry, cannabis is usually stored in an airtight container to sit and cure. This mellows out the flavors and makes it less harsh on your throat.

Smoke weed leaves after they’re cured will give you the most amount of THC content while maintaining an easy and mellow smoke.

Upon Harvesting

If you don’t wait until the leaves are cured you are going to be in for a pretty harsh smoke. With that said, it will probably still get you high if you smoke enough sugar leaves, but you probably won’t enjoy it.

Before Flowering

Smoking a leaf of a cannabis plant that is still in the vegetative state will likely yield no results. Most of the trichomes containing THC are developed during the flowering stage.

Thanks for reading! If you liked this article then here are a few of my other articles you may enjoy:

Can You Smoke Weed Leaves and Get High? It’s probably no surprise you can smoke weed leaves, but the real question is – will it get you high? Also, how strong is the high? Are certain types of

How To Differentiate Good From Bad Quality Marijuana Buds

Many think they can tell the difference between good and bad-quality bud just by giving it a once-over, but there are certain nuances people don’t consider. In this guide, we’ll walk you through each distinction, and offer some key tips on how to grow premium-quality cannabis buds.

How to tell the difference between good and bad cannabis buds.

Contents:

It probably didn’t take long after you started smoking weed to realise the differences between cannabis buds. Despite how everyone claims their weed is top-notch, you’ve probably noticed when the flower just isn’t up to par. In contrast, when you’re holding quality cannabis, you know it right then and there.

To ensure you only buy the best buds, learning the differences between top-shelf fire from rugged brick weed is vital. You don’t need to be a connoisseur either, as the differentiating traits can be seen and smelled with no assistance. Learning the differences will help you browse the shelves, sure, but it’ll especially help you judge the plants in your own garden. That, in turn, will help you make any necessary adjustments.

Types of Cannabis Buds

Cannabis flowers can be categorised into various quality spectrums. You could be talking about stickiness, terpene profile, taste, texture, or an assortment of other factors. To keep things simple, we’ve narrowed things down to three basic categories: low, medium, and premium-quality bud.

Low-Quality

Low-quality cannabis has a sorry look to it, mostly because it travels long distances after being stuffed into small packages. Known rightly as “brick weed”, these buds often arrive at their destination as dense cubes.

Rarely grown for quality or with much care at all, the producers associated with this level of cannabis are purely profit-driven. Often a black market product, low-quality cannabis typically stems from south of both the US border and the European continent.

Of course, some home growers with the intention to sell may also accidentally produce cannabis of similar quality. Novice growers will often mess up during the process and leave themselves with dry, unremarkable buds.

The key signs of low-quality cannabis include:

Medium-Quality

Domestic growers all over the world mostly produce buds that fall into this category. These flowers are set apart from poor-quality cannabis thanks to their improved colouration, heightened scents, and overt flavours.

Most growers manage to dial in their nutrients, watering schedule, and environmental variables enough to produce cannabis of this quality. The most important factor, though, is putting pride and effort into their work.

If you’re looking for medium-quality bud, or simply trying to dodge the bad stuff, look for these traits:

Premium-Quality

High-grade. Top-shelf. Fire.

Premium-quality bud goes by many names, yet they all describe its immense flavour and mind-shattering effects. These buds are hard to come by outside of big cities and weed-growing areas. Generally, they’re the products of skilled farmers and master breeders in hotspots like Northern California, Spain, and the Netherlands.

You’ll find these nugget-like buds encased in jars on the shelves of reputable dispensaries and highly-rated coffeeshops. If you’re looking for the best buds money can buy, keep an eye out for the following:

How to Differentiate Good Buds From the Bad: A Guide

We hope the above generalisations make it easier to distinguish the quality of a given bud, but it can get a bit more complicated. Below, we’ll get into the nitty-gritty and inspect cannabis flowers a little closer.

Aroma

As we discussed before, aromatic molecules known as terpenes are responsible for said signature scent. Despite the similar undertone, though, most strains feature unique smells thanks to different concentrations of terpenes.

You’re probably familiar with the small, shiny structures on the surface of cannabis buds and sugar leaves. These mushroom-shaped glands—trichomes—pump out terpenes during the flowering stage.

You’ll know you’re dealing with good-quality weed when the olfactory wave of terpenes hits straight after opening your stash. While a pleasing scent and cannabis quality aren’t unconditionally connected, the former is a likely indication of the latter. Hints of flowers, fuel, earth, spices, sugar, fruit, citrus, and berries are among the most common aromas.

The quality of a strain’s terpene profile depends on several variables:

  • Genetics: Some strains are genetically equipped to pump out more aromatic terpenes than others, mostly due to selective breeding practices.
  • Drying and curing: Genetics only achieve so much. Correctly drying, curing, and storing cannabis will preserve the terpene profile and make for better-tasting buds.
  • The right nutrients: During the flowering stage, cannabis plants have a higher demand for potassium and phosphorus and less of a need for nitrogen. Get this balance right, and you’ll produce some fantastic-smelling flowers.
  • Living soil: A strong microbial population will help plants access all of the nutrients they need to develop an optimal terpene profile.
  • Companion planting: Many growers claim planting basil in close proximity to cannabis helps improve its smell.

Quick Growing Tip: Boosting terpenes will improve the overall smell and flavour of your plants. Select strains such as Lemon Shining Silver Haze and Haze Berry to start with a genetic advantage.

Colour

Although you can’t judge a book by its cover, you can definitely judge cannabis buds by their appearance. There are many factors that indicate quality to a trained eye, and colour is one of the most important.

Of course, cannabis flowers come in an array of different hues of purple, orange, green, and red. It isn’t so much the colour that gives away quality, but more so the vibrancy. See, healthy and well-grown cannabis flowers have a bright and shiny look to them.

Such vibrancy signals good genetics, solid growing techniques, and adequate curing and storage. In contrast, poor-quality cannabis appears matte, dull, and pallid. These buds are often dark green to brown, pale, and ultimately unappealing.

Quick Growing Tip: Flushing plants at the right moment will prevent excess nutrients from accumulating in flowers and eliminate nutrient burn.

Additional Tip: Play around with genetics and temperature to grow purple weed! Start with genetics like Purple Queen to increase your chances of success.

Orange/Brown Pistils

Upon looking closely at the surface of cannabis flowers, you’ll come across a miniature landscape—valleys, peaks, and all—made up of different glands, organs, and structures. Among the scenery, the pistils protrude the most.

These hair-like tendrils are the sex organ of the female cannabis flower, serving as the receiver of male pollen. Once this genetic dust makes contact, the flower becomes fertile and swiftly goes to seed.

Away from their biological role, pistils serve as useful progress markers. During the early flowering stage, these reproductive parts boast a brilliant whiteness. As the weeks go by, their appearance turns to a solid dark orange.

You should always look for deep orange pistils when eyeing up buds. Harvest should ideally take place when at least 70% of the hairs turn this colour. This indicates the buds are ripe, mature, and ready for snipping. Flowers with mostly white pistils signal immature cannabis. Left a while longer, these flowers will mature and unleash a complete cannabinoid and terpene profile.

Quick Growing Tip: Harvest at the right moment, ensuring pistils are the right colour at the right time. You’ll need to be patient when cultivating strains like Amnesia Haze, as they have a slightly longer flowering time.

Crystals/Resin

Trichomes are the most abundant feature on the surface of good-quality flowers. To the naked eye, they appear as a fine layer of crystals that shimmer under torchlight or the flame of a lighter.

These mushroom-shaped structures feature a bulbous head atop a narrow stalk. In this head, specialised cells tasked with resin production work tirelessly during the flowering phase. The resin exudes downward and gradually covers the majority of the surface of the flower. This resin—and its active phytochemicals—help guard buds against insect attacks and temperature extremes.

The substance contains a complex array of molecules. Those of interest to us include cannabinoids such as THC and CBD, along with terpenes like myrcene, pinene, and limonene. The more trichomes a flower possesses, the more resin it will produce. The more resin coating the surface of a bud, the more cannabinoids and terpenes sit ready to be combusted, vaporized, or chewed and swallowed.

You’ll be able to tell the trichome and resin content of a bud just by looking at it and holding it. Note how it glitters, the stickiness, and consider the resistance generated as you peel your fingertips from the flower.

Quick Growing Tip: Utilise environmental factors to boost trichome production. Strains such as ICE are genetically wired to develop high quantities of trichomes.

Dense/Fluffy

How buds feel in the hand says a lot about their quality. Every grower hopes for dense and heavy buds at the end of the growing season. These flowers simply hold more mass, look much healthier, and smoke smoother.

Grinding up dense cannabis flowers seems to almost double their size. Even a small chunk of a compact flower can grind down to fill a good-sized joint. In contrast, fluffy buds yield disappointment and less plant matter. These airy flowers are often the result of suboptimal growing conditions, a lack of light, or nutrient deficiency.

Fluffy buds don’t only look less appetising, but you’ll need to use more of your harvest every time you roll a blunt or hit a bowl. Dense buds will offer some resistance and spring back to their original shape. Airy buds will almost collapse in on themselves, and feel much more feeble to the touch.

Quick Tip: Sativa and indica flowers tend to look different; know what to look for when browsing.

Growing Tip: Utilise powerful lights to grow dense and compact flowers.

Seeds

The presence of seeds is never a sign of quality flowers. The very word sinsemilla—a name given to weed of exceptional quality—refers to flowers devoid of seeds.

Remember those protruding pistils we covered earlier? When pollen from a male plant lands on the tendrils, it starts a process of changing the biochemical activity of the cannabis flower. The plant diverts its energy and efforts away from producing sticky resin and towards making seeds instead.

Flowers with seeds don’t reach peak potency and maturity because the resources are swallowed up by reproductive efforts instead. Cannabis seeds also make flowers heavier, meaning you end up paying more for less flower. If you buy one gram of weed and find 200mg of seeds nested within, you’ve wasted money. That might not seem like much, but consider that across 50–100 purchases, and that’s a lot of lost bud.

Unnoticed seeds can also ruin a smoke session. Seeds pop when the flame of the joint hits them, disturbing your zen and sending harsh smoke into your lungs.

Quick Growing Tip: Learn how to avoid pollination to keep seeds out of your weed.

Stems

Smoking stems either boils down to an accident or an act of desperation. Stems contain minuscule levels of cannabinoids and produce a harsh smoke. However, the presence of stems in your bag doesn’t necessarily indicate bad weed.

Rather, it shows a rushed preparation process. Plus, you paid for that extra weight! When browsing your local dispensary or coffeeshop, avoid buds with excess stems. Alternatively, simply ask the budtender to trim them off before you buy them.

Quick Tip: They’re not as valuable as buds, but you can use stems to make a variety of homemade products, from hash to topicals.

Well-Trimmed vs Leafy

Trimming weed refers to removing the sugar leaves—small leaves that grow out of and around cannabis flowers. The presence of sugar leaves doesn’t automatically render cannabis poor-quality, but it can make a big difference.

Firstly, well-manicured buds simply look great. Trimming gives the bud a nice nugget-like appearance, and the aesthetic is a near-universal trait of premium-quality flowers.

Secondly, excess sugar leaves will impact the weight of the flower. You want to be paying for buds, not leaves. Finally, the presence of sugar leaves can cause issues during the curing process. Small pockets of moisture can build up, creating a breeding ground for pathogens and impacting the taste of the weed.

Quick Growing Tip: You can trim your weed either before or after drying it.

Even between cannabis buds of the same strain, quality varies. Click to learn how to tell the difference between low, medium, and premium-quality buds.