Categories
BLOG

indoor grow box plans

DIY Grow Room: Build Your Cannabis Indoor Grow

If you live in a place where cannabis is illegal and you want to grow your own, the best option is to grow your plants indoors. A grow tent allows you to control the temperature, humidity, and most importantly, prevent light leaks and eliminate the smell. Despite what everyone thinks, you can build a cheap grow box if you know which materials to use and how to build it, here are a couple of homemade grow tent ideas to help you save money and start growing in no time.

1. Main requirements

Before starting to build your grow tent, you need to have a couple of things in mind.

Even though you can grow cannabis anywhere you want, what differentiates a grow tent from any other growing space is its ability to keep light from leaking, being airtight so the exhaust fans can work properly and you can keep a stable temperature and humidity.

You can build good stealth grow tent as big as you want, with everything you need to, from the appropriate structure for the light fixtures to the exhaust fan and filter, and as long as you can accomplish the main requirements, you will have a fully functioning grow tent.

A DIY grow tent doesn’t stay behind a grow tent you would buy at a grow shop if you use good materials and take your time to do it and despite seeming like hard things to do, it is fairly easy.

Light-proof

The grow tent needs to be 100% light-proof, this is to avoid the waste of precious light and avoids your plants from stressing out.

When flowering, you need to provide a 12/12 light cycle, if there is a source of light near your grow tent when the lights are turned off, that light might get in and stress your plants, making them revegetate or becoming a hermaphrodite.

This is why a grow tent must be 100% light-proof, it will not only allow you to maximize light usage but will also avoid any problems with your plants.

Waterproof

If you’re planning to build your grow tent with plywood for example, you have to cover the inside with a waterproof material like a plastic sheet (or something similar).

By doing this you keep the wood dry and avoid rotting (keeping mold away from your grow tent). It will also make it easier to clean and you won’t have to worry about water leaking to your floor.

Air-tight (temperature, humidity, and airflow)

As you may know, growing indoors allows us to control and adjust the temperature, humidity and intensity of the airflow, because of this, your grow tent must be air-tight.

If you fail to keep air inside, your exhaust fan won’t work properly, it won’t keep the cannabis smell contained and it will be easier to get bugs.

An air-tight grow tent is a must when growing in places where cannabis is illegal, failing to contain smell (and light) in the tent can easily cause neighbors to report you to the police, so make sure you check this a couple of times throughout your growing cycles, as this can easily be fixed and will save your from a lot of headache.

2. Different types of builds

When building your grow tent, you can make it as big as you want to and out of anything you have available as long as you make it light-proof, air-tight and waterproof.

The easiest ways of making it are with a metal (wood or plastic) structure and a plastic sheet covering it, or building a closet-like structure with plywood.

3. Building your own indoor grow step-by-step

To start building your own indoor growing space you’ll need some basic materials and tools, some you might already have at home.

Grow tent

A grow tent is the best DIY grow space because (depending on how you build it) you can easily disassemble it when you need to and then mount it again without needing anything else.

To build a grow tent, you will need wood, metal or plastic poles, and a plastic sheet.

The size of the poles obviously depends on the height and size of the grow tent you want to build, but here’s an example to build a 1x1x2 grow tent.

First, you’ll need to cut and assemble the poles into something like this:

As you see in the image above, you’ll need 8 poles with 1m each for the top and bottom part of the structure, 1m x 3 poles for (E) and (F) and 2m x 8 poles for (C) and (B). If you want to make it easier to handle and assemble, you can cut the 2m poles into 1m x 8 poles and connect them with PVC fittings.

You will also need 8 PVC 3 way knees to connect (A) to (B) and (A) to (C), and 6 PVC Tees to connect poles (E) and (F) to (A).

If you’re planning on using a heavy light fixture (or more than one) and an exhaust fan with a carbon filter, it’s better to use metal poles so the structure can bear the weight.

After you have all the poles and connectors ready, you need to cut the plastic sheet.

The plastic sheet should be measured on the grow tent before cutting so you don’t have to redo it, make sure it doesn’t have holes to avoid light leaks and if it doesn’t get too hot where you live you can use 2 layers of the sheet to make the tent more resistant.

Even though the plastic sheet is waterproof, you will need to coat the inside of the grow tent with a material that reflects light like a mylar sheet or a white plastic sheet.

Note: Instead of using mylar, you can use a white plastic sheet, it won’t reflect light as good as mylar but it works great if you can’t find mylar easily.

Grow “box”

A grow box is easier to build, although you cannot disassemble it effectively and the plywood can rot after a while because of the humidity and eventual water spills. To make a grow box out of plywood and wood beams, you’ll need a structure similar to the structure of a grow tent.

You need 1m x 8 wood beams for (A), 2m x 8 wooden beams for (B), and 1m x 2 or x 3 beams for (C). The amount of beams you need on top depends on the weight of your light fixture, exhaust fan, and carbon filter.

After you have the structure mounted, you need to cut the plywood to start closing the sides of your grow box.

You’ll need 1x1m x 1 and 1x2m x 4 plywood sheets, remember they need to fit perfectly so there are no light leaks and the grow box is as air-tight as it can be.

One of the 1x2m plywood sheets will need to be cut in half (for the door). You’ll also need 4 door hinges so you can open and close your grow box properly.

Tip : Even though it is not obligatory, you can glue pieces of rubber sheet where the plywood sheets meet and in between the door to make you maintain the temperature and humidity levels.

Because wood can get wet and rot, it’s a good idea to cover the inside with 2 layers of material.

4. Objective

The result of your DIY grow tent or grow box should be something similar to this:

With some minor differences, obviously.

After you have everything set up there are a couple more things you need to have your growing space up and running, these things are:

  • Ventilation system
  • Carbon filter
  • Light fixture

Unfortunately, you cannot make them at home (unless you have experience with electronics), so you’ll have to buy them.

5. Exhaust fan

The exhaust fan usually goes on the top part of the grow space and is connected by a tube to the carbon filter.

The exhaust fans ensure a good air exchange, this is crucial to the growth of your plants because the air exchange will provide the CO2 your plants need while letting out oxygen.

A good ventilation system along a decent-sized fan will also help your plant’s stem develop tougher, helping them support the heavy buds in the flowering stage.

6. Carbon filter

The carbon filter goes directly connected to the exhaust fan (sometimes it’s connected by duct tubing) and it’s what will eliminate the strong cannabis smell before letting the air out, a carbon filter is crucial if you are growing indoors in a place where cannabis cultivation is illegal, this will avoid problems with your neighbors and the police.

Have in mind that when making your own grow tent or box you will have to make the holes where the duct tubing goes in and out.

7. Light fixture

As you may know, light is vital for growing any kind of plants, including cannabis.

Depending on the kind of light fixture you’re planning to use, you’ll need to make some adjustments so you can adjust the height of your light.

Some lights are heavier than others or maybe you’ll need to use more than one light fixture. So remember to test the structure you’ve made with the exhaust fan, carbon filter, and light fixtures (and maybe add more support) so you don’t risk killing your plants if the equipment falls on them.

8. In conclusion

If you want to start growing your own cannabis you don’t need to spend a lot, despite the cost of a ventilation system and lights, you can easily build your own indoor growing space by yourself.

Make sure you’re taking the appropriate measure so it’s solid, steady, and can support the growing equipment and you’ll have a fully functional grow tent while spending way less than buying one at a grow shop.

If you live in a place where cannabis is illegal and you want to grow your own, the best option is to grow your plants indoors. A grow tent allows you to contro

Building an Ultra Stealthy Grow Cabinet

This article comes courtesy of the good folks at seattlecannabisjournal.com, and was re-edited for clarity and ease of reading. Click Here to view the original article in all its glory!

The day I got a recommendation for medicinal Cannabis was a relief. This was followed by the knowledge and urgency that I needed to get some plants in the ground immediately.

This had been a long-time dream of mine, and I fondly imagined my first harvest, curing my flowers to perfection, and collecting their resin for concentrates. I saw myself carefully journaling their progress, and eventually becoming an expert caretaker of myself and my marijuana garden.

Then reality set in: I have a small space, in a small house, in a crowded neighborhood.

Momentarily discouraged, I quickly scrapped the idea of a dedicated room filled to the brim. I began with getting clear about my intentions; I wanted to inconspicuously and autonomously produce my medicine. This was a much more respectable and realistic goal, and one that I could embrace.

After months pouring over cannabis related text and furrowing my brow at various nooks throughout my home, I saw through the problem. I would build a stealthy grow cabinet!

On Craigslist I found a cabinet kit still in the box for only $35. It came in at 24″ L x 30″ W x 70″ H. Next, I purchased a 6″ inline fan for another $100. The fan combined with a 400 watt light and Cool Tube from a previous grow gave me something to design around.

My sights set, I loaded Google’s 3D rendering freeware, Google SketchUp, and got to work.

Sirius: Google SketchUp can be pretty tough to use without training, especially if you’ve never used it and you just want to design one thing. Rest assured: some paper, a pencil, a little math, and careful planning will work just as well!

The first thing to deal with was the Intake and exhaust – a clean environment and fresh air for my plants.

A rule with any grow space is to have the intake’s opening twice the open area of the exhaust’s.

Important: The opening for your intake hole should be about twice the size of your exhaust hole.

My inline fan with had 6″ opening (28 square inches) so I would need 56 square inch opening. I went with two louvered grills that were 5″ x 8″ which gave me 80 square inches – 30% for the louvers = 56 square inches. Perfect!

Sirius: This is a great point! In any enclosed grow area such as a tent or grow cabinet, it’s important to have a larger opening for intake than for exhaust. This will maximize the efficiency of your fan in addition to keeping it working for longer. Plus, this will keep tents from “bowing” in, reducing your grow space.

Of course I wanted to filter the intake air to keep out dust, pet hair, pollen, mold and the like.

Next, I faced the issue of providing my plants their light.

I chose a High Pressure Sodium bulb. Since these produce more light from the side(the long side as opposed to the plug and tip of the bulb), light coverage could be maximized by positioning them front to back. Some creativity was required to install the Cool Tube to keep my HPS bulb from becoming too hot.

We learned above that the cabinet is 24″ deep. Now this Cool Tube was 20″, hardly enough room to attach two 6″ flex ducts for ventilation without having to keep a door open.

Keeping a door open is not a viable option for the stealthy gardener like me! I decided to use some creativity.

The solution I came up with was to place the duct work outside of the cabinet.

I built and installed 4″ x 10″ x 48″ wooden housing for the duct work for the exhaust of the Cool Tube (picture 3rd down). Next, three 6″ duct flanges into the back wall of the cabinet leading into the duct work spaced vertically 9″ apart.

This allowed three different height settings for the light. The unused two positions are capped off. Take a look…

I installed a sealed fan room to house the 6″ inline fan mentioned above. This sat in the top inside of the cabinet, pictured below.

Now that my fan room was set up, I allowed the exhaust to escape upward into a carbon filter. I mounted the filter inside a Rubbermaid tote to make the whole setup more discrete.

A fan speed controller and light timer are mounted on the outside of the fan room.

Next to the fan room is space for other more technical things. Here we find the ballast and command switching station.

Also, I installed a “Kill-a-Watt” device to monitor my electrical usage so I can easily calculate the total extra cost to my electricity bill each month.

I vented this area with a 4″ opening that opened into the fan room.

When all was said and done I harvested 264 grams (9.3 ounces).

Final Harvest Weight: 264 grams (9.3 Ounces)

Cost: $1.64/gram

The final bounty boasted nine ounces of dried and cured cannabis flowers.

After the initial investment, $1.64 was my total cost per gram when I factored electricity, carbon filter, and nutrients.

Affordable medicine is a right, and medicinal Cannabis sets a standard for patient autonomy. Enjoy producing your own medicine.

Sirius: This is definitely an advanced method of creating a grow box, but he makes sure to include a lot of things one needs to consider when creating one, such as ventilation and making sure to leave room for everything you need. Do you have a better/more practical/more efficient design? Let us know so we can share with the world!

See Another Stealth Grow Cabinet in Action and Build Your Own!

Was the cabinet in the above article a little too much for your sensibilities? Then check out these pics by one of our awesome readers!

Make sure to click each one to see the full size picture.

These pictures were sent in by one of our readers who has taken a far more simple/easy approach to making a grow cabinet than G.D. Bud. Here’s what he had to say about it:

“1st time grower. Plants are 1 month old, and 12″ tall now. Set up for less than $250. Used cab.w/4 bulb, 24″ T5’s, 4″ elec exhaust, Thanx for great info.”

Use the following items to make a stealthy grow cabinet just like his:

  • Old cabinet
  • Line inside of cabinet with mylar (reflective material)
  • Hang T5 grow light to inside-top of cabinet with rope rachets
  • Cut 12″ hole in back (near bottom) for cool air intake
  • Attach air filter to your intake hole if the outside air is dusty (and to protect your grow cabinet from any stray bugs)
  • Cut 4″ hole out the top to use as an exhaust hole (cut a bigger exhaust hole for a bigger cabinet, or if you’re going to intall more/bigger/hotter lights)
  • A 4″ exhaust hole uses 4″ ducting with fan to pull out hot air (drawing in cool air in through your intake).
    Remember, fan should be pointed up, to pull hot air out of your cabinet!
  • Now you just add plants!

See how one grower built his own stealthy grow cabinet (in pictures), then learn how to build your own!