How to Make a Homemade Grinder for Weed
Owning a grinder is a necessity for a weed smoker. This is because weed grinders help mix, blend and save the weed (by resisting spill) it also saves you the trouble of having your fingers stained with it, or have your hands stink of it. However, grinders are small in size and very easy to lose. So if you ever find yourself in a situation where you have just misplaced your grinder and have to do some grinding, and can’t wait to get a new one, here are some tips on how to make a homemade grinder for weed that you can use. This grinder will enable you to achieve the same results, or almost the same result as using a real grinder until you are able to buy yourself a real weed grinder.
Quick tips on how to make a homemade grinder for weed
Using a Chew Can
Find a chew can, empty its contents, pierce little nails (flat thumbtacks) into the top and bottom side of the can. You have to figure out a way so the nails don’t jam each other inside the can. Put your weed into the can and twist from side to side. Open the can and enjoy rolling up your finely ground weed. Its effect is almost the same as a real weed grinder.
Using Scissors and a Shot Glass
Using a dry shot glass, throw your weed into it, use small nail scissors or any small scissors and cut away. Keep cutting until you are satisfied with the way it looks when you have finished, pour it on your rolling paper and roll it up. This technique is by far the simplest technique. It is easy to do, quick, and does not require materials. Once you have a shot glass and scissors, you are good to grind. This method is very easy and is also very effective.
Using a Black Pepper Grinder
Black pepper grinder (click to see the best price on Amazon) is one of the best alternatives. If you own one, fill up the pepper container with some of your weed, grind out the quantity you want to smoke and, leave the rest of it inside the grinder. Or grind out the quantity you want to use now and some for later then keep the pot empty. The grinder can be a special place to store the weed provided it’s kept away from the kitchen and the reach of children. You don’t want to make the mistake of using weed as black pepper in your cooking.
Using a Coffee Grinder
This technique is very popular among smokers. Try an electric coffee grinder (see the best price on Amazon) , its results are great. It grinds it nicely. But be careful how long you leave it grinding. It can easily turn your weed into dust. Throw all your dense buds into the coffee grinder and start grinding, but remember not to leave it on for too long or your weed can turn into powder.
Using a Pill Bottle and a Nickel
Put some weed into an empty plastic pill bottle, drop a nickel into the bottle, close it and shake vigorously. The weed will come out looking nicely ground. This technique sounds hard to believe and understand but it actually works. Try it and you will be amazed at the results.
Using a Knife and a Chopping Board
Bring out a chopping board, make sure its clean and dry. You can wipe it dry with a kitchen cloth or paper towel. place the weed on top of the board, get a sharp knife and start chopping. This method is very effective and your weed comes out well chopped.
The most recommended method without a doubt is to go and buy a real grinder. It does the grinding perfectly, holds it in and doesn’t over grind it. It always comes out finely ground. There are various types of grinders available in the stores, they made out of different materials like plastic, wood or metal, and also come at different prices depending on your budget. Some are transparent so you get to see how well it has grinded without opening it.
There are some weed grinders that come with a little magnet inside which keeps the grinder closed and helps it resist spill. These grinders are mostly manual. They don’t have switches that will grind them automatically so you have to twist them left and right by yourself. Learning how to make a homemade grinder for weed is easy and effective for emergency use because you can get most of their materials easily around the house. So if you are not in a position to buy one, make one and get similar results.
Learn how to make a grinder for weed! There are also guides on how to make a homemade grinder for weed with household items. Owning a grinder is a necessity for a we
How to Grind Weed Without a Grinder
Smoking weed is a pretty simple process. Break up, throw it in a bowl or roll it up in some paper, and boom, you’re ready to rock and roll. It’s not like you needed us to tell you that. But here’s where we come into play. Grinding up your bud is arguably one of the most important steps of the process, so not having a grinder on deck could serve as a bit of a hindrance. Whether it’s because you lost it, left it at home on vacation, or just really don’t like how finely some of the better grinders break up your bud, keep in mind there are always solid alternatives. So let’s take a look at how to grind weed without a grinder. It’s pretty straightforward, really.
Cutting Board And Knife
This one is a pretty classic technique, and common sense if you brainstorm on the matter of how to grind weed without a grinder for five seconds. Still, it’s worth putting on the list. There’s no real need for an explanation with this one. Simply make sure your knife is sharp enough. Otherwise, if you’re holding some real sticky shit, it’s just going to stick to the knife. At that point, you might as well karate chop it with your hand. Make sure you got a sharp knife, and you’re gucci.
Pill Bottle And A Coin
The pill bottle and a coin method is an old-school technique that works to perfection. Get an empty pill bottle, and throw the bud you want to grind up in there. Then, get either a dime or a penny and add it to the bottle (FYI, you’ll probably want to clean the coin with some hand sanitizer, rubbing alcohol, or cleaner first). Screw on the bottle top and shake it like a polaroid picture. Even the stickiest of icky doesn’t stand a chance against this method.
Scissors And Shot Glass
Scissors are a good tool to break up buds, but the scissors and shot glass method really takes the cake. This might be a little tough if you’re at a concert or festival, but if you’re at home and have a pair of scissors, you should be good to go. All you do is put your bud in the shot glass, and begin snipping at it. A shot glass gives you the perfect range of motion, but if you don’t have one, you can also use a small cup or something like it.
How to grind weed without a grinder Part IV requires another common household item—a coffee grinder. This method can be a pain to clean, but it’s the closest thing to grinding it with an actual weed grinder because, well, you’re using a grinder. And if you’re grinding up larger quantities of weed, this is probably the best way to go.
Alright, this method is a little crazy, but hey, why not add it to the list? If you really like your bud ground to a fine powder, this method works. It’s certainly not your best bet. Also, it’s probably the biggest hassle to clean, as you need to clean your blender blades thoroughly after you’re done grinding your weed. It might not be the most effective way—but hey, it’s a way.
Pestle and Mortar
This method might make you feel like you’re a 14th century apothecary, but it’s still effective, nonetheless. A pestle and mortar has long served as a way to “mix the medicine,” so to speak, and grinding weed certainly falls under that umbrella.
But in all seriousness, these things were literally invented to grind herbs. Think of it as your great, great, great, great, great, great ancestor’s grinder. And it’s pretty self-explanatory—simply place the buds in the mortar (aka the bowl-like receptacle) and crush it up with the pestle. The only think we’d suggest is leaving the bud out for a little bit to dry out before using this method. After all, it’s pretty difficult to break up moist, sticky bud with a tool that predates Christ.
Cheese Grater Method
Desperate times call for desperate measures, and if you’re all out of ideas, well, we’re not one to judge. Just pretend that big beautiful bud is a hunk of parmesan cheese and start grating away. Just make sure you give it a thorough rinse before your Nonna makes her famous pasta fagioli.
Using a Homemade Weed Grinder
If you’re someone who outright refuses to break up bud without the use of a grinder, you might have to get a little creative. And by creative, we mean literally making your own grinder from scratch. This method is probably the most unconventional (and perhaps counterproductive, especially if you have to go to the store and buy the necessary parts), but if you already have all the items at home it’s actually pretty simple. And effective.
The main component to this device comes courtesy of a chewing tobacco can. If you already dip and have a bunch of tin cans lying around, then you’re already halfway there.
Once you make sure the can is empty, all you have to do is pierce nails—preferably, thumbtacks—into the top and bottom sides of the tin. Like a real grinder, make sure the top and bottom row of tacks don’t overlap each other, or else you won’t be able to close the tin and grind. After you insert the nails/tacks with proper spacing, put the weed in the can like a regular grinder, close it, and twist away. You won’t have a third compartment or kief catcher at the bottom, but your bud should certainly be ground up.
Break It Up With Your Hands, Dingus
Last but not least, the most obvious answer to the question of how to grind weed without a grinder—just freaking break it up. If your bud is too sticky, this can be a real pain, but it’s still worth it if you don’t feel like scrounging around for makeshift, household items. If it’s really SUPER sticky, you can leave it out to dry a little, or even put it in the freezer for a bit. Either way, this is probably the simplest way to break up your bud.
If none of these methods appeal to you, buckle down and look at some of our picks for the best grinders on the market today. Ponying up the extra cash may be worth your time in the end.
Looking for some old-fashioned methods? We got you.