Categories
BLOG

building a grow box for weed

How To Build A DIY Cannabis Grow Tent In Just 3 Steps!

Want to grow your own weed? DIY grow tents are easy to build and give you complete control over your plants’ growing environment so you can produce top-tier bud!

Looking for a simple, cost-effective setup for growing your own weed? Below, we’ll walk you through the simple process of building your own grow tent for a fraction of the price of a store-bought tent/box.

WHY BUILD A DIY GROW TENT?

Growing your own weed is a great experience. Germinating your seeds and watching them grow into healthy plants with big, aromatic buds is a great way to develop a deeper connection with this ancient plant. Not to mention, you’ll likely end up with a far superior product than what you’re able to score elsewhere.

Unfortunately, not everyone has enough space to grow plants outdoors under the sun. That’s where a DIY grow tent comes in; for many people, a homemade grow tent proves to be the most cost-effective and efficient setup. While small grow tents are pretty cheap, you can build your own tent for next-to-nothing if you take the time to hunt around for supplies. Plus, they allow you complete control over your plants’ growing environment and produce a great harvest every time!

IMPORTANT CONSIDERATIONS FOR YOUR DIY GROW TENT

Before you start looking around for building materials, take a few minutes to reflect on these important considerations for your tent:

LIGHTPROOF

Cannabis plants need well-defined light and dark periods in order to flower properly. Light leaks during dark hours can stress photoperiod strains, stunting their growth, interrupting their flowering, or even triggering hermaphroditism. Even autoflowering strains are believed to rely on consistent dark hours for respiration, photosynthesis, and more. Hence, your DIY tent must be lightproof.

WATERPROOF

Cannabis needs regular watering and feeding. Make sure your tent is waterproof so runoff or spills don’t cause any damage to the area around your tent.

AIRFLOW

Cannabis plants need proper airflow to grow properly. Poor airflow, on the other hand, can create hot spots in your tent that trap heat and humidity, creating a breeding ground for bacteria and attracting pests. Your tent needs to be well-ventilated to prevent these problems.

The size of your grow tent will vary depending on the amount of space you have available, your budget, and how many plants you plan on growing. A 1 x 1m tent is arguably the most common size used by hobby growers, but you can go bigger or smaller than that based on your needs. Just know that if you want your plants to reach their full potential, your tent will need to be at least 1.5–2m tall to give them enough space to grow and prevent them from getting too close to your lights.

WHAT DO YOU NEED TO BUILD A DIY GROW TENT?

Building your own tent is surprisingly simple. Here’s a list of everything you’ll need:

MATERIALS

19mm PVC pipes are sturdy, cheap, and ideal for creating the frame of your tent. You’ll need:

• 16x straight pipes for the verticals and horizontals (the length of pipe will vary depending on how large you want your tent to be)
• 8x 90-degree corner fittings
• 4x t-fittings
• 1x cross fittings

PANDA FILM

Panda Film works great as the walls of your tent. Remember to use the black side of the film on the outside to absorb light, and the white side on the inside to reflect it.

LED GROW LIGHT

There are many different grow lights on the market, but we recommend LEDs for their energy efficiency and durability. HID lights are cheaper than LEDs and can produce great results, but they’ll need replacing after two harvests and use a lot of energy.

There are plenty of fans on the market. If you’re building a large tent for big harvests, we recommend using a fan and carbon filter to eliminate the odour from your plants. If you’re building a tent to grow just a few plants, a regular wall fan will do fine.

TOOLS

Once you’ve got your materials, you’ll need the following tools for the assembly of your tent:

• Duct tape (to create the Panda Film covering for your tent)
• Hand saw (in case you need to cut any of your PVC pipes to size)
• Velcro (for the opening of your tent)

HOW TO SET UP YOUR DIY GROW TENT

Now that you’ve got your materials and tools, follow these steps to build your very own cannabis grow tent in less than a day:

STEP 1: ASSEMBLING THE FRAME

If you weren’t able to buy your PVC in the size you need, cut it to size using a hand saw. Whatever size tent you’re building, you’ll need 16 straight pieces of pipe; 4 for the verticals (which should be at least 1.5m long), 4 for the base, and 8 for the roof of your tent.

Once you’ve got your straight pieces of pipe cut to size, use the fittings to connect them and build the frame of your tent. Keep in mind that your roof should have a cross fitting in the middle for extra stability to hold your light, fan, etc.

STEP 2: COVERING YOUR TENT

You’ll need to cover your tent twice; once with the white panda film for the inside of the tent, and again with black film for the outside.

The easiest way to do this is to start with the walls; tightly wrap a single piece of film around 3 of the 4 walls (the 4th will be the opening of the tent). Secure the film to the PVC pipes where your opening will be.

Next, cover the roof of your tent with another piece of film. Make sure there’s at least 3–5cm of overlap on every wall, and stick the sides down with duct tape. Step inside your tent, look for light leaks, and cover them using duct tape from the outside.

Finally, for the opening of your tent, cut a piece of film long enough to run from the middle of the roof to the floor. Secure it to the roof of your tent using duct tape and to the PVC frame on the side and bottom using Velcro.

STEP 3: INSTALLING YOUR LIGHT AND FAN

Install your grow light to the top of your tent according to the instructions that came from the manufacturer. Remember to pull the power cord out through a small opening in the roof and seal the sides with duct tape to avoid light leakage.

Finally, sit your fan on the floor, and you’re done!

TIME TO START GROWING CANNABIS!

Now that you’ve got your DIY tent built, it’s time to get growing. Make sure to read our post on indoor cannabis growing equipment for a complete list of all the gadgets you’ll need to grow your plants, and don’t forget to order your seeds directly from our web store to ensure a great harvest. Happy growing!

Want to grow weed on a budget? Click here for simple instructions on how to build your own grow tent from scratch. It's easier than you might think!

Building Your own Cannabis Grow Room

So, you have decided to grow your own cannabis at home. Nice one! Growing your own cannabis not only guarantees a continuous supply of wonderful weed, it also leads to a greater appreciation of the herb and the sense of a job well done. It is well documented that time in the garden is as beneficial as meditating, increasing one’s sense of well-being and even helping combat anxiety and depression.

Growing cannabis at home means having somewhere dedicated to growing. To produce enough weed to last from harvest to harvest, a minimum of 1m² is recommended. This will accommodate a number of smaller plants or one or two well-trained, or even scrogged, larger plants. All this is up to you; the yields in the end are similar, it just depends on whether you want a lot of variety with smaller yields per plant, or less variety and larger yields per plant. It is entirely up to the individual.

The height of the grow room is dictated by available space and lights being used. A single square metre is easily covered by most styles of grow light. Less height is required when using fluorescents, as lights can be kept closer to plants throughout the grow, whereas HID lights need more distance to avoid light burn and excessive heat buildup. You might want to blast your babies with a 1000W HID, but without appropriate height, this just isn’t possible.

SELECTING A SPACE

Everyone can find an easily accessible spare square metre somewhere in their home or apartment. Spare rooms, attics, basements, cupboards, and walk-in robes can be used to set up a grow space. Discretion is a key factor; fan noise, light buzz, and odour control each need to be considered when selecting a space to set up a grow room. An oscillating fan attached to a shared partition wall, for example, will drive your neighbours crazy with the noise and sympathetic vibrations.

  • 1. Light proofing
  • 2. Airtightness
  • 3. Air movement
  • 4. Air exchange
  • 5. Climate control
  • 6. The build
  • 7. Collection rack
  • 1. Light proofing
  • 2. Airtightness
  • 3. Air movement
  • 4. Air exchange
  • 5. Climate control
  • 6. The build
  • 7. Collection rack

LIGHT PROOFING

An entirely light-proof grow room is absolutely necessary. In the first instance, light leakage can be annoying because grow lights are extremely bright. Light leakage can keep you awake at night if your grow room is a bedroom cupboard or set up in a spare corner of any inhabited room. At worst, it will advertise that you are growing weed to your whole neighbourhood.

Secondly, light leakage into the grow room can adversely affect plant performance. Once plants have been flipped to the 12-12 day/night cycle to induce flowering, light leakage can confuse plants and lead to a lower yield, hermaphroditism, or even failed crops due to light stress. All growers keep a keen eye out for male plants, but missing a few well-hidden bananas on females can ruin a whole crop by sending it into seed production.

Once your grow space is set up, do a test by turning on the lights and inspecting for any light leakage. Any cracks or holes that let light out will certainly let light in. When and if discovered, patch the holes with light-proof tape available at hardware stores or with at least two layers of gaffer tape—gaffer tape is semi-translucent, even the black stuff, so just one layer won’t do the job.

Most electrical equipment kept in a grow room, such as dehumidifiers, have quite bright micro-LED lights, which can do the same plant damage as environmental light leakage. Place a piece of tape over any lights on these types of appliances to ensure nights are the darkest of dark. Outdoors, the subdued light of the full moon has beneficial effects on plant growth, but this effect is difficult to translate to an indoor grow.

AIRTIGHTNESS

As it matures into resinous, fat buds, good cannabis smells—it’s as simple as that. Some weed even overpoweringly reeks and can stink out a whole room, a whole house, or even a street. It is easy to become used to that luscious aroma when visiting your plants often, and become convinced that the smell isn’t going further than your grow room—but nothing is further from the truth. A well-sealed grow room prevents aromas from disturbing neighbours or your fellow inhabitants.

A well-sealed grow room also makes climate control easier to maintain. Temperature control and dehumidifying/humidifying air rely on a sealed environment without any drafts. A stable environment is very important for optimum plant performance. A well-sealed room also acts as a quarantine cell for your plants, preventing any bugs, vermin, or airborne pathogens from entering. A single mouse can do a lot of damage to cannabis in only one night, especially to young plants, as they are voracious for nutrient-dense cotyledons and young stalks.

It should be noted that an airtight grow room is a low-budget solution. Spending more to set up an air exchange system will benefit your weed substantially and will pay itself back in the long run. However, airtight grow rooms are the ideal environments for experimenting with CO₂ enrichment for added plant performance.

AIR MOVEMENT

Healthy cannabis requires moving air. Any grow room will require at least one oscillating fan to ensure air is continually in circulation. Moving air has a number of benefits for the cannabis plant.

At a minimum, moving air should ruffle all the leaves on a plant to ensure fresh air is available to the leaf stomata. In still environments, stale air can build up on the undersides of leaves around the stomata and hinder efficient gas exchange. This has the undesirable effect of inhibiting plant growth; stems will become weak, leaves will droop, and plant performance will be poor.

Moving air strengthens plants considerably; stems and stalks become thicker and more robust, and end yields will be higher.

Moving air also helps with the wet-dry cycle of the growing medium by supporting evaporation. Moreover, it prevents pathogens caused by moisture buildup on leaves as they transpire. Moulds like nothing more than a moist, warm environment.

AIR EXCHANGE

With a higher budget, introducing an air exchange system stimulates better growth. Air exchange requires an inlet for fresh air and an exhaust for depleted air. With a higher budget still, incorporating a carbon filter into the exhaust system will keep the stink factor to a minimum.

Air inlets are passive and can take a number of forms; however, they are always situated in the lower part of the grow room, either in the floor if the floor is raised, or in a wall. The main consideration is light control when putting perforations into a grow room. A simple slot, vent, or series of holes will provide ample air intake, but can be indiscreet with light. Using a piece of ducting with a bend in it, or configuring a double wall arrangement, stops light escape. The easiest thing to remember is that light can’t go around corners, so introducing an arrangement with a bend of some kind keeps your grow discreet. Also, provide some kind of vermin barrier to dissuade any critters that want to get in and feed on your precious weed.

An air inlet means there will also be an air outlet or exhaust system, ideally with a carbon filter attached. Exhaust systems remove depleted air and heat from the grow room and draw fresh air in. Where possible, it is desirable to exhaust to the outdoors to prevent heat buildup in closed spaces, or to recirculate the same air back into the system. This can often be a challenge, but ducting is your friend when solving air distribution problems.

The capacity of an exhaust fan is dictated by the volume of the grow room. Length × width × height will give the volume of the grow room, and the manufacturer will recommend what fan will be right for the job. It is recommended to go up a size to ensure proper air exchange, and to accommodate any potential increase in the scale of your grow.

CLIMATE CONTROL

Cannabis thrives when the climate is controlled in regard to humidity and temperature, with certain parameters ideal for vegetation and other parameters ideal for bloom.

Humidity can be easily controlled with a dehumidifier; these are also available as double-action units that will add or subtract humidity as necessary. During vegetation, a humid and warm environment increases the rate of growth, while lower humidity and temperatures increase bud development.

Temperatures can be controlled with small, portable, reverse cycle AC units. Many humidity-modifying units and heaters come with built-in thermostats and hygrometers, so they switch on and off as the environment demands. Just set them, and rest assured your weed is booming at every stage; automating the whole thing makes growing life a lot easier.

THE BUILD

Now that you have selected a space that satisfies the demands for a healthy and discreet grow, it’s time to actually build your grow room. There are a number of solutions to create a grow room at home on a budget. This method uses a number of plastic-lined wooden frames to form the walls, base, ceiling, and door. When including a ceiling, supports for the grow lights will need to be incorporated. When dealing with existing walls and ceilings, BE ABSOLUTELY CERTAIN OF THE LOCATION OF ELECTRICAL WIRING. Also, tenants will need to consider the future repair of any surfaces that might be affected when building their grow room.

What you will need:

• A saw
• A stapler that can staple to wood
• Doubled-sided plastic sheet: one side black, the other side white or reflective like Mylar
• Screws
• 4 small hinges
• A drill with a drill bit and a screwdriver bit
• Scissors
• 26 angle plates
• Plastic corner protectors (optional)
• Timber to suit: 4x4cm (or close enough) pine or similar softwood is easy to handle, strong enough, and cheap; your local hardware shop will certainly have this available in a variety of lengths

INSTRUCTIONS

1. To create the top and bottom of your frame, you will require 4x 1.0m + 5x 92cm laths of wood.

– To create the sides of your frame, you will need 7x 192cm laths.

– To create the door, you will need 2x 1.0m laths + 2x 192cm laths.

2. For the top: To affix the laths, drill holes 2cm from each end, and one in the middle for the spax. Do the same to the bottom.

For the door: Drill holes 2cm from each end in the 1m laths. Spax together with the vertical beams.

3. Now that you have created the bottom frame, take one of the 192cm laths, place it in one corner, and affix it with two angle plates. Repeat in each corner.

4. Now that all 4 are in place, place the top and affix all vertical laths to it with angle plates.

5. Measure out the middle between the vertical laths and affix your stabilising beams with 2 angle plates (3 for where they meet the supportive beam of the top frame).

6. Using scissors, cut a piece of plastic/Mylar that will overlap every edge of each frame. Staple the plastic into place on the overlapping edge using plastic corner protectors.

7. Locate the door and screw the 4 hinges into place.

8. Voila, your grow room is now ready to be fitted out.

COLLECTION RACK

Building a collection rack in the floor of the grow room helps keep things neat and tidy. The plants in their pots are placed in this rack so that dirt spills and dead leaves and water runoff are collected then easily removed. When the grow is over, the collection rack is easily swept out and sterilised before the next grow.

To do this, you will build a frame that sits 15cm-deep inside your grow room and is lined with the same plastic used for the walls. This stops the actual floor of the room from becoming filthy and encouraging pathogens.

It is customary to flush plants at regular intervals during the grow, primarily to wash away any fertiliser salt buildup and to keep the medium in a cannabis-friendly nutrient range. Although there is no nutrient buildup in an organic grow, there is always some runoff. However, at the end of the flowering phase prior to harvest, all growing methods require a final flush to increase bud quality. The collection rack will catch all the runoff water, where it can be easily sopped up.

A collection rack can also act as a passive watering system if you are going to leave your plants unattended for a few days. Adding fresh water to the collection rack acts as a de facto reservoir, and plants will wick water up and not dehydrate while you are gone.

GET GROWING

You have now created a space that lets you grow your own cannabis at home. It lets in fresh air for healthy exchange of carbon dioxide, oxygen, and heat; it is light-tight for optimum plant health and discretion, and is clean and easy to maintain. Now, all you have to do is decide on whether you are going to grow organically or with nutrients, and select some killer strains to bring you joy!

Во-первых, пространство для выращивания должно быть полностью светонепроницаемым.